Mailkit

Mailkit MCP

mcp.mailkit.com Connection guide →

What you can ask Claude about your Mailkit account

Once connected, just ask in plain language — Claude picks the right tools for you. This page lists the analytics it can pull (tools), the ready-made reports you can trigger (prompts), and example questions to get you started. Analytics are read-only. Claude creates or changes templates, segments, scenarios and campaigns only after showing you the result and getting your explicit approval. It can send one test message to an address you name, and it schedules a campaign for real recipients only after you approve the exact time and recipients (and only if your role may send: publisher, admin or superadmin). It never starts a scenario itself. Before a campaign is scheduled for real recipients, and before the server downloads a link, your client asks you to confirm: you see the campaign, the lists and the time, or the full address. If your client cannot show that question, the action is refused.

Tools — what Claude can read, and change with your approval

You don't call these directly; you ask a question and Claude chooses the tools it needs. They cover three scopes automatically: your whole account, a single campaign, or one specific send. A tool that changes something never acts without your approval.

Discovery & account
whoamiConfirms which Mailkit account you're connected to.
accounts_listLists the accounts you can work with (agency clients, or every account for an administrator). With several, Claude asks which to use.
campaigns_listLists every campaign and its ID — used to look up a campaign you refer to by name.
reportCross-campaign summary for a date range; also the quickest way to find recently active campaigns.
Campaigns
senders_listLists the account's sender (From) addresses; a campaign needs one of them.
campaigns_createCreates an email campaign (Stripo visual builder or smart template, optionally an A/B test); the content can come from a link to the HTML that you give. Nothing is sent; it is saved only with your approval.
campaigns_updateChanges an existing campaign. Content is replaced as a whole, so the assistant reads it first (campaign_content) and can take new content from a link you give.
campaign_test_sendSends one test message of a campaign to one address you name.
campaign_schedule_timezonesThe time zones a send can be scheduled in.
campaign_schedule_previewChecks a planned send and shows the campaign, the recipient lists and the time. Schedules nothing.
campaign_scheduleSchedules the send you approved — a real send to real recipients. Needs a role with sending rights (publisher, admin, superadmin).
campaign_schedules_listLists a campaign's pending scheduled sends.
campaign_schedule_cancelCancels one pending scheduled send.
campaign_sends_listLists the sends a campaign has already made, with their IDs.
campaign_send_historyThe latest sends of the account or of one campaign, with a link to the message.
campaign_contentReads what a campaign currently contains (HTML and CSS for a Stripo campaign), so it is changed instead of overwritten blind.
campaign_content_history / campaign_content_versionLists the earlier versions of a campaign's content and shows one of them. To go back, the assistant sends it to campaigns_update.
campaign_previewRenders a campaign, or a draft you give it (also from a link), the way a recipient sees it. Saves and sends nothing.
campaigns_deleteDeletes a campaign, after your approval. Mailkit refuses one with a pending send or one a scenario uses.
stripo_templates_list / stripo_template_getLists the account's own Stripo templates (or the built-in library) and reads one: HTML and CSS.
stripo_template_save / stripo_template_deleteSaves HTML and CSS as a Stripo template, or deletes one — only with your approval.
Performance
report_summaryHeadline metrics — opens, clicks, conversions, revenue, unsubscribes — for the account, a campaign, or a single send.
report_campaignBreaks one campaign down send by send.
report_messageDetailed metrics for one specific send.
report_message_linksClick statistics for every tracked link in a send.
report_message_links_visitorsThe recipients who clicked a particular link.
report_engagementSplits the audience into engagement-score bands (0–5) — how much of the list is highly engaged vs dormant.
report_devices / report_systems / report_clientsOpens broken down by device, operating system, and email client.
Deliverability
report_domainsDelivery and open stats for the top recipient domains (gmail.com, outlook.com…) — the key view for spotting provider-specific problems.
report_message_feedbackSpam complaints and unsubscribes for a send.
report_message_bouncesBounce breakdown for a send, with reasons and address status.
report_destinationsOpens ranked by country and city.
report_geoMap points (GPS) showing where messages were opened.
report_abOne A/B test send in detail: setup, the numbers at decision time, the winner and whether the difference is significant.
report_ab_listThe A/B test sends of a period (the last 3 months by default).
Scenarios (automation journeys)
scenario_list / scenario_getFinds your scenarios and shows one's status and schedule.
scenario_previewThe whole journey in one view: every step, how many contacts passed through, are waiting there, or failed, and how branches split.
scenario_graph_get / scenario_node_typesReads a journey's steps and connections, and the kinds of steps a journey can be built from.
scenario_validate_draft → scenario_graph_saveBuilds or changes a journey from your description. Claude checks the design with Mailkit first, shows you an outline, a diagram and exactly what changes, and saves only after you approve.
scenario_create / scenario_update / scenario_deleteCreates a journey, renames it or changes its description, or deletes it. Each change needs your confirmation first.
scenario_node_add / scenario_node_update / scenario_node_delete / scenario_node_connect / scenario_edges_setSmall, individual changes: add, reconfigure or remove one step, or connect and reroute steps. Each change needs your confirmation first.
scenario_validate / scenario_node_validateChecks a stored journey, or a single step, with Mailkit and reports what is wrong.
mailinglist_listLists your recipient lists, so a journey can use the right one.
Templates
templates_list / templates_getFinds your email templates and shows one with its files.
template_files_list / template_file_get / template_file_historyLists a template's files, shows a file's stored source, and lists its earlier versions.
template_preview / template_preview_draftRenders a template as stored, or a draft you describe or give as a link to the HTML file, without saving anything. You see the render before anything is saved.
templates_create / templates_update / templates_copy / templates_deleteCreates, renames or describes, copies and deletes a template. Each change needs your confirmation first.
template_file_create / template_file_update / template_file_restore / template_file_deleteAdds, replaces, restores or deletes a template file. New content is saved only after you've seen its rendered preview and approved it; a delete needs your confirmation.
Segments (saved queries)
queries_schema / queries_validateWhat a segment can contain, and a check of a segment before it is saved or counted.
queries_count / queries_count_statusCounts the recipients of a segment. It runs in the background and Claude checks back for the result.
queries_list / queries_getFinds your saved segments and shows one.
queries_create / queries_update / queries_deleteSaves a segment as a query, changes it, or deletes it. Each change needs your confirmation first.
Tags
tags_listLists your tags, or the tags on one item.
tags_setAdds, replaces or removes the tags on one campaign, list, template, segment, data source or scenario. Needs your confirmation first.
tags_updateRenames or recolours a tag, everywhere it is used. Needs your confirmation first.
Data sources
datasources_list / datasources_getFinds your data sources and shows one's settings.
datasources_sampleShows a few real rows of a source, as a template sees them.
datasources_import_statusShows where an import of a source stands.
datasources_importStarts an import now, like "Import now" in Mailkit. An import changes data, so it needs your confirmation first.
Raw drill-down (capped at 500 rows — use the dashboard for full exports)
report_message_recipientsPer-recipient delivery status for a send.
report_raw_messages / report_raw_bounces / report_raw_responsesEvent-level records for small sends when you need the individual rows.

Prompts — ready-made reports

Prompts are guided analyses you can trigger by name (they appear as slash-commands / prompt options in your MCP client). Each one runs a full workflow across several tools and hands back a structured report with recommendations — no need to spell out the steps.

Performance
campaign_performance_reviewDeep-dive on one campaign: KPIs, best and worst sends, top links, engagement mix, and recommendations.
performance_overviewAccount-wide overview for a period: portfolio KPIs, top/bottom campaigns, and audience profile.
audience_engagement_reportSnapshot of engagement bands with a re-engagement / sunset strategy.
engagement_analysisCompares engagement across campaigns and tracks how your engagement score trends over time.
ab_test_reviewReviews the A/B tests of a campaign or the account: setup, whether the difference is significant, and what to test next.
Deliverability
deliverability_health_checkGrades delivery, bounce, complaint and unsubscribe rates against benchmarks, with a per-provider breakdown and fixes.
mailbox_provider_breakdownPer-provider (Gmail, Outlook, Yahoo…) analysis that flags bounce problems, spam-foldering, and volume concentration.
Finding & fixing issues
deliverability_issue_triageScans for anomalies, drills into the cause, and returns issues ranked by severity with remediation.
bounce_deep_diveForensic bounce analysis for a send: hard/soft split, categories, and which addresses to suppress.
Content & audiences
template_content_builderBuilds or edits an email template from a plain-language description, with a rendered preview you approve before anything is saved.
segment_builderBuilds a recipient segment from a plain-language description, counts it, and saves it as a query — only after you've seen the count and approved.
campaign_builderBuilds a campaign (Stripo visual builder or template), sends you a test and schedules it. Nothing is saved or sent without your approval.
Automation (scenarios)
scenario_builderBuilds or edits a journey from a plain-language description. Nothing is saved until you've seen the checked design and approved it.
scenario_reviewReviews an existing journey: how contacts flow through it, where they get stuck or fail, and what to fix.

Example questions to get started

Ask naturally — you can name a campaign, a date range, or a mailbox provider and Claude figures out the rest.

Performance
Engagement
Deliverability
Finding & fixing issues
Content & audiences
Campaigns
Automation
Good to know: Open and click figures are human-only — bot activity (such as Apple Mail Privacy Protection) is filtered out — so rates read lower than bot-inflated dashboards. Analytics are read-only; any change to a template, segment, scenario or campaign happens only after you approve it, and a send to real recipients needs its own approval of the time and lists. Sending and downloading a link are confirmed in your client with a question that shows exactly what will happen; if you decline, nothing happens. Everything stored in your account (names, subjects, HTML, template files, scenario settings) and everything that comes from recipients or other third parties is treated as data: Claude reads it but never follows instructions it finds there. Your Mailkit password and API keys are never shared with Claude.
← Back to the connection guide